Oct. 27, 2017 - Over the past few years, the lumber industry has been confronted with chip production above and beyond the demand, resulting in the creation of big surpluses in various regions of Quebec and Ontario. This situation may well get worse in the coming years, as pulp and paper mills—which used to be large consumers of this resource—buy less and less chips or if there is a substantial increase in production. At the same time, the wood panel manufacturing industry is facing a certain number of challenges relating to the constant supply of raw materials, and particularly with regard to the quantity and quality of the materials.

To meet the needs of panel manufacturers that want to diversify their sources of supply as well as respond to the necessity of finding new markets for sawmill residues, FPInnovations has launched a new project aimed at evaluating innovative fragmentation technologies adapted to sawmills that convert small diameter logs for the production of by-products to be used in manufacturing structural and non-structural panels. Within this project, FPInnovations’ Engineered Wood Products Manufacturing team shipped to a European company already using the fragmentation technology sawmill residues in the form of slab wood, trim ends and cull logs from various species and in a variety of shapes and diameters. FPInnovations will evaluate the possibility of fragmenting these logs that are unfit for being processed into lumber in order to use them to make wood wafers of desired dimensions for panel board mills.

Thanks to this new approach, wood wafers produced in sawmills may be delivered to panel manufacturers and used directly as raw materials, without any subsequent processing. In addition to offering new opportunities, this approach will help improve the mechanical and physical properties of the panels, while cutting the production costs, through a decrease in the density of the panels and a reduction in the amount of resin-based binder required.

This development project aims to offer companies producing wood chips a way of increasing revenue from non-traditional markets. For more information, contact Xiang-Ming Wang, Associate Research Leader in the Engiveered Wood Products Manufacturing group, or Serge Constantineau, Manager of the SM2 Initiative.

Nov. 13, 2014, Woodstock, NB – Garant GP, a leading Canadian manufacturer of snow removal and gardening tools, has modernized its value-added mill to help increase yield from the wood supply and improve the plant's efficiency, thanks to support from the Government of Canada. The Woodstock operation has been manufacturing handles for Garant GP's specialty lawn, garden and snow removal tools since its opening in 1961 and was later acquired by the company in 1968.

Mike Allen, Member of Parliament for Tobique-Mactaquac, on behalf of the Honourable Rob Moore, Regional Minister for New Brunswick and Minister of State (Atlantic Canada Opportunities Agency), joined Garant GP officials at the sawmill to tour the facility.

"With the current market conditions, the Canadian manufacturing industry is more than ever challenged to maintain a high efficiency level to remain competitive in the North American marketplace. With ACOA's involvement in the funding of this project, this will enable Garant GP and its employees to maintain employment in New Brunswick. Having been part of the Woodstock community for over 50 years, carrying out this project will help to ensure the continuity of our operations for many years to come," says Jean Gaudreault, President, Garant GP.

The project involved a building expansion and the installation of advanced technology to improve the plant's productivity. An obsolete circular saw and carriage were replaced with a new high efficiency band saw and carriage. A new scanner technology system was also added to improve wood usage. These upgrades will increase the profitability of the various lines of wooden dowels that are manufactured at the Garant GP sawmill, and help the plant remain competitive.

"Our Government is pleased to work with businesses like Garant GP to help strengthen the economy of our region. The expansion and new equipment at Garant's Woodstock sawmill will increase productivity and improve overall efficiency and will boost the sustainability and competitive edge of this business," says Mike Allen, Member of Parliament for Tobique-Mactaquac, on behalf of the Honourable Rob Moore, Regional Minister for New Brunswick and Minister of State (Atlantic Canada Opportunities Agency).

The Government of Canada is investing $473,300 in the project, through ACOA's Business Development Program.

Garant GP is a national leader in the manufacturing of non-motorized winter snow removal and summer gardening tools, thanks to its continuous investment in new technologies and the development of a highly skilled and experienced workforce. Founded in 1895 in Saint-François, Quebec, Garant GP was originally a small family operation that offered hand fashioned and forged tools.



July 2, 2014  - While the Stella-Jones pole processing plants in Prince George and Galloway, British Columbia both report to North America's leading provider of utility poles and railway ties, each facility is responsible for managing its own operation independently. When it came to choosing a replacement for their aging log-handling equipment, the two site managers, working 500 miles apart, came to the same conclusion.

Today, the Prince George and Galloway facilities are both running new purpose-built SENNEBOGEN 830 M-T material handlers.

Bob Stewart was the Plant Manager in Prince George when the purchase of their 830 M-T was proposed to head office. "We looked at 3 or 4 different makes of machines last year, made our decision on Sennebogen and put together the business plan to acquire it."

In Galloway, meanwhile, Richard Harkies was also shopping for new equipment. "We had already looked at the other two big names in material handlers," he recalls. "Then Tom Truman (from the Sennebogen dealer, Great West Equipment) came by and took us to see a Sennebogen demonstration in Lavington. We hadn't actually heard of Sennebogen before then!"

Before the year was out, Galloway had become a Stella-Jones operation and the purchase of the machine went ahead. Great West Equipment delivered the first one of its 830 M-T's to Prince George in January, and the second was delivered to the Galloway Mill in June.

The 830 M-T is a purpose-built material handler for trailer pulling. It has an undercarriage and transmission configuration that's specially built to pull over 100,000 lb. log trailers. The two material handlers were then fitted with Rotobec log grapples. They were also customized to widen out the tines and the tips to minimize damage to the wood. Each was then equipped with a live heel.

While the two sites differ in some ways in their specific application, their managers are equally satisfied that the 830 M-T was the right way to go.

The Prince George plant processes both utility poles and railway ties, so its log handler has to manage moving and loading square timber as well as round wood. "We stack the ties in packs of 25 for air seasoning," says Bob Stewart. "Then we load the bundles onto gondolas for delivery. The 830 M-T pulls a tridem trailer loaded up to 75,000 lbs. It could be a larger sized machine than we really need, but we wanted to be prepared for future demands, too. We anticipate that we'll get 10 to 15 years of service from this unit."

"It has a lot of hydraulic power," he continues. "It takes a fine touch to grab a large load without damaging the wood. These controls are very user-friendly and the hydraulics are very responsive. We also find that the stance of the machine, with its wide wheelbase, is much better for getting around even in soft ground than what we experienced before."

Richard Harkies also cites improvements in mobility among the advantages of the 830 M-T. "We have to drive a half-a-mile from one end of the yard to the other. With a separate transmission on each axle, it pulls smoother and it doesn't shift as hard and it's more stable."

Harkies notes that the extra stability is especially helpful when the operator's cab is elevated. "The high-lift cab is way better for loading rail cars, because you can see the top of the load. The operators can set it at the best height, for comfort, for whatever they are doing. In the spring, after the snow, you can get potholes, which can make it a little rough up there! The wide stance and pneumatic tires smooth out the ride for them."

Stewart and Harkies are both confident that their concerns about the future reliability of their equipment have been answered. Sennebogen's 100,000 sq. ft. headquarters near Charlotte, NC maintains the largest inventory of material handling parts in North America. Great West Equipment, their Sennebogen distributor, also keeps a large stock of off-the-shelf parts for their customers. And Stewart acknowledges the importance of Great West's experience in the industry. "We have been dealing with (Great West representative) Dillon Healey for 8 or 9 years. We always feel that we get a good deal and they're always very helpful making sure that our equipment is perfectly suited to our application."

The stability and smooth pulling power of the 830 M-T is well suited to the 1/2 mile circuits in the log yard.

June 16, 2014 - In rural New Brunswick, a couple hours north of Moncton, a former logging contractor has sold his forest machines to invest in a green technology that will give local wood products the durability to compete with exotic hardwoods. The technology was developed in Finland where wood product manufacturers have found that simply heating lumber at very high temperatures changes the chemical composition of the wood to make it rot resistant.

Pierre Friolet worked in the forest for 20 years, but in 2008 he decided to give up the forest side as it became harder for the contractor to make a good wage. “It’s all about how fast you’re cutting it now and the technology that’s coming out is just to cut faster and faster.”

As wood prices go up, the sawmills are recouping more of the costs but the logging contractors aren’t benefiting from the market improvement, Friolet explains. “I always loved the wood; we don’t add enough value to our resources.”

Finding more value in the woods
Value is what Friolet and his partner, Robert Lennon, are now adding to the lumber they’re treating at Thermalwood Canada. Building on experience in the local wood products industry, they have carved out a niche to complement rather than compete with other local wood manufacturers. The method they use, thermal modification, can be used on any species, but Thermalwood Canada is narrowing in on hardwoods such as ash and maple.

“We’re going to help to bring more value to the private woodlot owners in the area,” explains Friolet. “We’ve gone down the road of hardwoods, which nobody else has really done - it has allowed us to open up a bunch of other niche markets.”

 hot asset chart


How the process works
Experimental research on thermal modification of wood was carried out in the 1940s and 50s in the U.S. and Germany, but the industrial application of the process was developed in the 1980s. Research and development on industrial uses has resulted in the development of many thermal modification treatments including: Perdure (Canada), ThermoWood (Finland), Retification (France), Thermoholz (Austria), Intemporis (Switzerland), Iwotech (Denmark), and others.

The kiln Lennon and Friolet use was built by Valutec (which uses the technology developed by ThermoWood) completely out of stainless steel to resist the stress caused by high temperatures, acids and other compounds that evaporate from the wood. Using only heat, steam and water, the wood temperature is raised quickly to around 100 degrees Celsius.

Once the wood’s moisture content is reduced to nearly zero, the actual thermal modification stage begins by bringing the temperature up to a level of 185 to 215 degrees Celsius depending on the wood species. The wood is kept at this temperature for a couple of hours in low oxygen and steam to prevent the wood from burning and to initiate chemical changes.

The temperature of the wood is then reduced using water to cool it and return some moisture to the lumber, for a moisture content between four to six per cent.

The whole process takes about 65 hours in the kiln and doesn’t allow for any shortcuts. If shortcuts are taken and the thermal modification process is initiated before the wood has been completely dried, any moisture that is not removed in the first step of the process would become trapped within the wood’s core as the lumber is heated from the outside in. As the temperatures increase and heat penetrates the wood, the moisture can result in stress and damages to the wood.

But cracks might not be immediately apparent. “If you sold it to somebody in a rough form, then they get it and they want to split it in half, the issues will start to show up then.”

If thermal modification is done properly, however, the heat changes the molecular structure of the wood, improving the dimentional stability, improving its resistance to fungal decay and changing the colour of the wood throughout. Heating the wood to these temperatures results in the degradation of hemicellulose with water-binding properties and lignin reticulation indicating the formation of molecular chemical bonds.

The end product can last as decking for over 25 years and as a siding for over 50 years. Unlike pressure-treated lumber, nothing is added to the wood and the product can be made from local wood rather than imported exotic hardwoods. The end product, however, is less resistant to impact and abrasion, and the chemical changes in the wood accelerates discoloration when exposed to UV radiation or rain. Research in Finland has also found that thermal modified wood remains vulnerable to termites.

Developing a niche
Thermally modified wood requires no stains to protect it from the elements, though it will turn grey without it. If thermal modification is done slowly and carefully, there is very little shrinkage or warping during the treatment and the process blends any visual flaws that might have made the wood less desirable before modification.

“We’ve taken a product, like pine, that if you left it outside, you might get five to 10 years out of it and through this process, you’ll get 25 plus. I have used this product for raised garden beds and three years later I pulled it out and washed it just to see how it was. It was just like it was brand spanking new,” says Lennon.

Lennon explains his decision not to compete against pressure-treated lumber, which is much cheaper to make than thermal modification. Because of the price, “people are going to pick the pressure-treated lumber versus the thermally modified right away,” says Lennon. “So we focus more on the hardwoods to be able to compete with the exotic hardwoods, like the mahogany and stuff like that that people are using for decks. Now we can offer white ash or maple for exterior decking whereas people would never have used it before.”

Focusing on underutilized wood, Thermalwood Canada buys bird’s-eye maple that has mineral stains that would reduce the wood’s value for any other application. Instead, after the wood has been thermally modified, it has been darkened and the stains are subtle. The wood that would have previously been used to make pallets is now a premium piece of siding, decking or can be used for interior finishes.

Space to share
At the Canadian Woodlands Forum Spring Meeting in April, Elizabeth Beale, President and CEO of the Atlantic Provinces Economic council told attendees that the forest industry in New Brunswick shrunk by over 40 per cent since 2004. But since April 2013, export growth to the U.S. of Atlantic forest products has been up 20 per cent. Thermalwood Canada is setting itself up to take advantage of the improving economic conditions and support others who want to do the same by sharing warehouse space and wood-processing equipment.

“Our business model has evolved so that we’re building partnerships with people who want to manufacture a product using our wood,” says Lennon. “And if we can set them up here within our facility, it removes a lot of the waste of transporting that material. Once we’ve set up these different companies within our facility, we work together as a cooperative or a cluster format.”

To this end, Lennon and Friolet have bought some conventional kilns and dehumidifiers from a failed sawmill to provide some local drying systems. Using underutilized hardwoods and local species is the company’s aim but they’ve had to go far and wide to get the supply of wood that’s in demand in their markets. Rather than continuing to import from Maine or New York State, the company is making an investment to make it easier to buy directly from a neighbourhood supply.

“If you’re a private woodlot owner, and you’ve got all this wood that you’d love to saw and sell, you can’t because you can’t kiln dry it,” says Lennon. “And their only option today if they want to make some money with the wood on their land is to send it down to Miramichi to get it chipped up for OSB.”

The company currently has partnerships in place with two companies and is in discussions with a third to move it into the warehouse and make use of both the wood and the equipment Thermalwood has on site.

Increased interest
Carl Tremblay, a researcher at FPInnovations, has been researching thermal modification for years and wrote an article on the various technologies of thermal modification available in Canada (

He is quick to correct the common misconception that the wood takes on inert properties after thermal modification. “Thermally modified wood is not a dead material, there is still water adsorption, swelling and shrinkage [that] can still be observed with variation of the climatic conditions. The higher the temperature of treatment, the more stable the material will be.”

According to his research, there are currently four variations of thermal modification in use in industrial application in Canada with six kilns in production and a fifth kiln manufacturer in Ontario that has closed temporarily. But Tremblay has had enough inquiries into the technique to keep a list up to date so he can send it off quickly and easily when curious investors come calling. “In the last six months, there has been a new wave of interest,” said Tremblay.

The manufacturers process different species for different markets, many of which are exporting to Europe. But despite  increased interest, the kilns are not currently running at full capacity.

Forming partnerships and educating architects is working for Friolet and Lennon, however. “We just got a purchase order for nine thousand square feet of maple siding for a building in Newfoundland. So we’re very happy we got that.”


Subscription Centre

New Subscription
Already a Subscriber
Customer Service
View Digital Magazine Renew

Popular Articles


We are using cookies to give you the best experience on our website. By continuing to use the site, you agree to the use of cookies. To find out more, read our Privacy Policy.