April 27, 2018 - U.K.-based marketing and consulting firm IndexBox has published a new report called "World: Wood-Based Panels - Market Report. Analysis And Forecast To 2025".
Canadian Forest Industries has published key findings of the report below.
Global market of wood-based panels softened its growth
In 2016, the wood-based panels market grew to 408M cubic meters. After a slight reduction from 2008 to 2009, the market grew steadily through to 2016, however, the pace of growth decelerated over the last three years. In wholesale prices, the market accounted to $162B. In value terms, the market showed a more pronounced dynamics — it contracted by 15 per cent in 2009 and then recovered over the next two years with further upward trend. However, in 2015, the market dropped slightly and retained this level in the next year.
Plywood (155M cubic meters), particle board and OSB (119M cubic meters) and MDF/HDF (97M cubic meters) were the most consumed product categories, together making up 91 per cent of global consumption in 2016. Consumption of veneer sheets (4 per cent), hardboard (3 per cent) and other fibreboard (2 per cent) held small shares in the market.
The wood-based panels market is to reach 467M cubic meters by 2025
The shifting of potential market opportunities from developed countries to developing ones has been one of the main global trends in the wood based panel market over the last few years. While the economically mature markets of the U.S., Canada, and Western Europe are expected to have a modest pace of housing starts, the fastest growing Asian countries such as China, India, Indonesia and Vietnam are expected to continue growth due to rising urbanization and disposable incomes. The other emerging economies, such as Russia, Brazil, and Eastern Europe appear to have potential of growth, but it is restrained by lack of investments and the shrinking of consumer spending due to an economy slowdown.
The world economy is expected to experience fundamental changes, supported by decreasing oil prices, the slowdown of Chinese economy, and the deceleration of the world trade. However, the demand from downstream industries in largest consumer countries is forecast to remain positive, backed up by wide product use, increasing regional integration, and positive conditions for wood-based panel manufacturing. The Asia-Pacific region will remain a key growing market. Despite the slowing pace of construction in China, the expansion of China's economy continues to be significant, similarly to other rapidly-growing countries in the region (including Indonesia and Malaysia). The U.S. is also an important market, with a steady expansion in construction, combined with the stable levels of employment and the rising incomes, leading to an increasing demand for wood-based panels. In general, the global wood-based panel market is expected to continue to grow by +1.5 annually in the medium term which will lead the market size to 467M cubic meters by the end of 2025.
Wood-based panels output grew by 45 per cent from the outset level
Production of wood-based panels reached 410M cubic meters in 2016, with an upward trend over the last seven years. This resulted into an increase of +45 per cent from the outset level. In 2010, global wood-based panels overcame the pre-recession production level of 2007. In value terms, the production flattened at $161B in 2016 after a 7 per cent drop recorded in the previous year; prior to that it increased robustly from 2010-2014.
China was a major producer of wood-based panels
China was the key world wood-based panels producing country with an output of about 204M thousand cubic meters in 2016, which accounted approx. for a half of total global output. The other major producers were the U.S. (eight per cent), Russia (four per cent), Canada (three per cent), Germany (three per cent), Brazil (three per cent), Poland (two per cent) and Turkey (two per cent).
In China, production levels increased by +10.4 per cent annually from 2007 to 2016, largely attributed to favorable economic conditions and growth of construction market. The other major producing countries showed mixed dynamics of wood-based panels output in physical terms. In 2007-2016 annual growth rates were especially high in Turkey (+6.5 per cent) and Russia (+4.1 per cent). Germany (-3.7 per cent), Canada (-2.1 per cent) and the U.S. (-1.1 per cent) were major producing countries with an annual decline of wood-based panels output.
Approx. 21 per cent of wood-based panels consumption is imported
Wood-based panels is a widely traded commodity. The share of imports in global consumption stood at 21 per cent in 2016. Despite the fact that the share of imports decreased noticably by seven percentage points over the last nine years, the market is still highly dependent on imports. High trade intensity is determined mainly by the substantial distances between the main centers of wood-based panels manufacturing countries and key consuming countries.
Particle board, plywood and MDF together made the vast majority of world exports
Particle board and OSB (29.9M cubic meters) and plywood (29.5M cubic meters) constituted the largest product categories in terms of exports, each comprising 34 per cent of the total exports in 2016. Exports of these products recorded a slight growth in volumes from 2007-2016: the average annual growth rates stood at +0.8 per cent and +1.0 per cent, respectively. MDF/HDF lagged somewhat behind, accounting for a 19 per cent share of total exports and expanding with a CAGR of +1.8 per cent over the same period.
China and Canada are the leading suppliers of wood-based panels to global market
In 2016, the volume of global wood-based panels exports totalled 87.5M cubic meters, expanding robustly from the bottom point of 2009. In 2013, exports recovered from a slump caused by global financial crisis of 2008-2009 and then continued to increase gradually. In value terms, it fluctuated near $34B from 2011 to 2016.
China (14.8M cubic meters in 2016) and Canada (8.4M cubic meters) were the main global suppliers of wood-based panels with a combined share of 27 per cent of global exports. Germany, with the share of seven per cent, Malaysia (six per cent), Russia (six per cent), Thailand (five per cent) and France (four per cent) were the other major exporters. From 2007 to 2016, Russia (+9.4 per cent per year) emerged as the fastest growing supplier among the major exporters, followed by Thailand (+4.9 per cent per year) and China (+3.3 per cent per year). Meanwhile, exports from Canada reduced by -1.5 per cent per year over the same period.
The U.S. continues to lead the globe in terms of imports of wood-based panels
The volume of global imports totalled 85.2M thousand cubic meters in 2016. In terms of dynamics, imports were generally in line with exports: these trade flows globally complement each other. In value terms, the total imports stood at $34.9B in 2016, this figure remained relatively stable over the last four years.
In 2016, the U.S. (12.9M cubic meters), Germany (5.6M cubic meters), Japan (4.2M cubic meters), China (3.5M cubic meters), Canada (3.4M cubic meters), the UK (3.4M cubic meters) and Italy (2.7M cubic meters) were the leading destinations of wood-based panels imports, together making up 42 per cent of the global imports. Among the major importing countries China (+1.3 per cent per year) gained the highest annual growth rates from 2007 to 2016. Despite a rapid acceleration in 2014-2016, the U.S. imports of wood-based panels still need to grow a bit more to regain its outset level. By contrast, Japan and the U.K. recorded a slight decrease with regard to imports, which contracted by -2.0 per cent per year and -1.1 per cent per year, respectively, from 2007-2016. In the other countries, imports remained relatively stable throughout the analyzed period.
The full report can be accessed here.
Global market of wood-based panels softens growth: report
Federal government invests over $1.43M in forestry initiative in YukonDec. 7, 2018 – To promote greener heating solutions, create…
Canada to remain major supplier of softwood lumber to the U.S.Dec. 11, 2018 – Consumption of softwood lumber in the U.S.…
Interior overhaul: John Deere redesigns its L-Series machinesDec. 11, 2018 – Sitting side by side at the…
Target zero incidents or accidents – is it achievable?Dec. 5, 2018 – A university student from the UK…
TLA Convention & Trade Show
January 16-18, 2019
B.C. Natural Resources Forum
January 22-24, 2019
6th Annual Forest Industry and Timberlands Conference
January 24, 2019
Western Forestry Contractors' Association Conference and Trade Show
January 30-1, 2019